New Items

Product Details:

Advantages at a glance  The injection system FIS V is the all-round talent for all important building materials and almost all tasks in non-cracked concrete, masonry and reinforcement.  Additional variations FIS VW HIGH SPEED with short curing times and FIS VS LOW SPEED with longer processing times available.  Extensive range of accessories for almost all applications.

Additional Information:

• Production Capacity: 120 °C
• Delivery Time: immediately
• Packaging Details: 360ml

Product Details:

Product Properties • Two-component Epoxy Resin Based Adhesive • High Bond Strength • Rapid strength development even at low temperature (≥ +80 C) • High Mechanical strength • Tested for strengthening of component using Nafuflex DB Strips. • Confirms to ASTM C 881 Type I, IV grade 3, Class 3 and AASHTO M-235 Specifications Areas of Application • Adhesive for high-tensile Strengthening elements with Joint Sealing Strips for expansion joints made of reinforced concrete, brickwork, steel and wood. • Industrial, traffic, structural and housing construction

Additional Information:

• Item Code: 1280
• Production Capacity: Gm/cc 1,00
• Delivery Time: immediate
• Packaging Details: 10kg Epoxy Bonding Adhesive

Product Details:

Product Properties Provides an efficient adhesion and bonding of mortars, concrete and plaster to old hardened concrete or mortars bases Nafufill® BBR (STD)admixed mortars are easy to work with and can be drawn to very thin layers Nafufill® BBR (STD)increases the elasticity of the mortars and concretes and therefore prevents the formation of stress cracks in the hardened and set mortars or concretes Nafufill BBR® (STD) increases the resistance of the screeds, plasters and concrete against attack by oils

Additional Information:

• Item Code: 1254
• Production Capacity: 9 Months from date of Manufacture
• Delivery Time: immidate
• Packaging Details: 20 kg,5 (5 Kgs x 2), 1 (1 kg x 12)

Preparatory measures Prior to injection, an investigation of the structure, the foundation soil or the construction pits and any leaks must be carried out according to the state of the art and the rules of technology and an injection concept must be planned. Packers must be set before injection. The areas to be injected must contain water. Dry structures require the preinjection of water. Trial injection is recommended. Mixing the components MC-Injekt 2111 IN is ready for immediate use. The processing time is unlimited without contact with water. MC-Injekt 2111 IN only begins to react when it meets water. Acceleration of Reactivity The reaction of the resin can be accelerated by adding up to 5% of the catalyst MC-KAT 20. Injection Injection of MC-Injekt 2111 IN is performed using a 1-component pump (e.g. MC-I 520) into waterbearing structures or cavities. Since moisture/water contact will start the reaction, dry components must be filled with water prior the injection of MC-Injekt 2111 IN. The storage container must remain closed during processing in order to prevent materials from water/moisture contact. A skin can form on the resin surface due to humidity. This protects the resin underneath from further reaction with moisture. Solid components must not be sucked into the pump. MC-Bore Packer DS 14 or MC-Bore Packer LS 18 are recommended for injection into components. MC-Injekt 2111 IN is not suitable for permanent sealing measures against pressurized water. Postinjection with MC-Injekt 2300 top or MC-Injekt 2700 L IN is required for permanent sealing. Application work should cease once component/substrate temperatures fall below 5 °C. Ensure compliance with the information given in the specifications and the Safety Data Sheets. Equipment cleaning Within the working time, all solvent-resistant equipment can be cleaned with MC- Cleaner eco or thinner product MC-Thinner PU. Material that has reacted or set can only be removed mechanically.

Additional Information:

• Item Code: 12
• Minimum Order Quantity: 2 sq ft
• Production Capacity: 100%
• Delivery Time: immediate
• Packaging Details: 5 l canister 10 l canister